
If your garage door is broken in Castle Downs, call 780-908-0907. We repair springs, cables, rollers, tracks, sensors and openers on homes in Castle Downs, 24 hours a day, 7 days a week. We come to you from our shop on Chappelle Rd. SW in Edmonton. A service call and diagnosis typically costs $90 to $130 plus GST, and you approve the written price before we start.
A broken spring or cable can drop the door without warning. If you heard a loud bang, the door will not lift or a cable is hanging loose, stop using the door. Do not pull on it, do not use the red release handle with the door open and do not try to fix it yourself. Keep people, pets and vehicles clear and call us.
Castle Downs is a large area of northwest Edmonton made up of 11 neighbourhoods. Development began in 1971, and the City Museum of Edmonton reports that the population grew from 713 that year to 7,855 by 1977 and about 22,000 by 1981. So a large share of the garage doors here were installed in the 1970s and early 1980s, and many are 40 to 55 years old. There are three eras of building:
These are the problems we see most on older doors:
Our general garage door repair service covers the rest.
Many older garage doors use extension springs, not the torsion springs on most newer doors. They look different, and they fail differently. This table shows how to tell:
| Torsion spring | Extension spring | |
|---|---|---|
| Where it is | On a bar above the door | Along each side, beside the horizontal track |
| What it looks like | One or two thick coils on a metal shaft | Two long, thin coils, one on each side |
| When it breaks | A loud bang, and the door will not lift | The spring can snap and fly. A cable may whip loose |
Extension springs should have a safety cable running through the middle of each spring. If a spring breaks, the cable keeps the pieces from flying across the garage. If you can see your springs and there is no cable through them, call us and we will check. Do not stand near the door while you look.
Extension springs and torsion springs are both under extreme tension. Do not try to adjust, remove or replace either one yourself. See spring replacement.
A door that is 40 years old can keep working if you look after it. Once a year, before winter, do this:
If anything fails, stop using the door and call us. See garage door maintenance service.
We serve all of Castle Downs, including:
Clareview, to the east, has its own page: Clareview. So does McConachie, in the far northeast: McConachie. If your street is not listed, call us and we will tell you if we can come.
Our shop is on Chappelle Rd. SW, and Castle Downs is in northwest Edmonton, on the other side of the city, so the drive depends on the time of day, traffic and the weather. We do not promise a time we cannot keep. When you call, we give you an arrival window for your address. Doors that are stuck open, off the track or hanging on a loose cable come first.
For a repair that is not urgent, book early in the day. See our same-day garage door repair page for how same-day booking works and our emergency garage door repair page for after-hours calls.
These are typical prices for the Edmonton area, plus GST. We confirm your exact price in writing before we start.
| Repair | Typical price |
|---|---|
| Service call and diagnosis | $90 to $130 |
| Spring replacement, pair, standard door | $280 to $450 |
| Cable replacement, pair, standard door | $180 to $320 |
| Roller replacement, full set | $150 to $260 |
| Off-track door reset and realignment | $150 to $300 (more if the track is bent) |
| Sensor cleaning and realignment | $90 to $150 |
| Opener repair (remotes, limit settings, simple parts) | $120 to $180 |
Heavier doors, insulated doors, double doors and large shop doors cost more because the parts and the labour are bigger. After-hours and travel charges, if any, are told to you before the work begins.
Along with repairs and new doors, we also do:
Ask us when you call.
We also repair garage doors in Clareview and McConachie.
A service call and diagnosis typically costs $90 to $130 plus GST. A spring pair typically costs $280 to $450, a cable pair $180 to $320 and a roller set $150 to $260. We confirm the exact price in writing before we start.
We tell you the full price, including any travel or after-hours charge, before we start, and you approve it first. Call us with your address and we will confirm the price for your visit.
Development began in 1971, and the population grew from 713 to about 22,000 by 1981. Many original doors are 40 to 55 years old, though most have had parts replaced. Rapperswill, planned in 2010, has newer doors.
Extension springs run along each side of the door, beside the horizontal track. Torsion springs sit on a bar above the door. If you have extension springs, there should be a safety cable running through each one. If you cannot see one, call us and we will check.
Older openers may not have the safety sensors of a modern one. Check that the door reverses when it touches a 2×4 board flat on the floor, that there are sensors near the floor on each side, and that the manual release works. If it fails any of these, stop using the opener and call us.
Often yes, if the door is straight and the panels are sound. A worn spring, cable or roller is a normal repair. If several panels are damaged or the door needs repairs every year, compare the repair price with a new door. We give you both.
Yes, we recommend it. Both springs have been through the same number of cycles, so if one has broken, the other is usually close behind. Replacing both also keeps the door balanced.
No. Springs and cables are under extreme tension and can cause serious injury. If you heard a bang, the door will not lift or a cable is loose, stop using the door and call us.
Tell us what your door is doing and we will tell you what we need and how fast we can be there. Call 780-908-0907 or request a quote. We are open 24 hours a day, 7 days a week.